- Description
- Warranty Information
Package Includes: - (1) Rockville 15" Car Audio Subwoofer
- (1) Rockville Single 15" Vented Car Sub Enclosure Box 3.51 Cu Ft, 3/4" MDF
- (1) Rockville KRYPTON-M3 4000w Peak/1000w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp+Remote
- (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
Video of W15K6D2 V2:
Features:
- Rockville W15K6D2 V2 K6 Series 15" Dual 2-Ohm Car Subwoofer
- Peak Power Handling: 4000 Watts
- Program Power Handling: 2000 Watts
- CEA Rated RMS Power Handling: 1000 Watts
- 3" Voice coils (Black Aluminum Former Wound with 100% OFC Copper Wire
- The wire we use is made in the USA! It is one of the most important components to make the sub high quality and last longer
- Double Stacked 112 Oz High Quality Magnet
- Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient
- Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone
- Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
- Red Stitching Cone Reinforcement Ensures Long Life
- Polypropylene (PP) Dustcap
- Two Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire
- Impedance: Dual 2-Ohm Voice Coils
- Vented Hole on T-yoke Enhances Heat Dissipation
- Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet
- Custom Rockville Mounting Gasket Looks Beautiful and Makes it Easy To Mount the Subwoofer Air-Tight
- High BL Magnetic Motor Gap
- We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
- Cutout Diameter: 14.09 inches
- Mounting Depth: 7.4 inches
- Frequency Response: 27 Hz - 1.5K kHz
- 8mm T-Yoke + 8mm Washer
- Sensitivity: 85dB
- Sealed Enclosure Volume: 1.85 - 3.0 Cubic Feet
- Vented/Ported Enclosure Volume: 2.75 - 4.0 Cubic Feet
- Weight: 19.84 Lbs.
- Shipping Weight: 24.25 Lbs.
- Shipping Box Dimensions: 18.19" x 18.19" x 13.19" Inches
- XMAX:24 MM (One way)
TS Parameters:
- Fms: 29.8 Hz
- Res: 74.3 Ohm
- Re: 4 Ohm
- Qms: 5.62
- Qes: 0.68
- Qts: 0.61
- Rms: 9.0kg/s
- Cms: 0.11mm/N
- Mms: 271.1 gr
- Nref: 0.40%
- Bl: 17.2N/A
- SPL: 88dB
- VAS: 107.6L
- Rp: 30.7 Ohm
- LP: 31.7mH
- CP: 1097.7uF
- Le: 2.70mH
Detailed Info:
- Body: Non-Pressed Paper
- Gap Plate Inside Diameter: 90mm (3.54 inches)
- Gap Plate Outside Diameter: 156mm (6.14 inches)
- Gap Plate Thickness: 25mm (1 inch)
- Yoke Outside Diameter: 145mm (5.71 inches)
- Yoke Thickness: 8mm (0.31 inches)
- Yoke Pole Diameter: 70mm (2.8 inches)
LI.MsoNormal { MARGIN: 0in 0in 0pt; FONT-FAMILY: "Times New Roman","serif"; FONT-SIZE: 12pt; mso-style-parent: " }
Description for Rockville Enclosure:
The RGV15 single 15" vented speaker box is made in the USA with Grade A MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasnt enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!MADE IN THE USA WITH PRIDE!
Features:
- Rockville RQV15 Single 15" Vented/Ported Subwoofer Enclosure
- Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
- 3/4" USA Heavy Duty MDF Construction
- Machine precision cut mounting holes
- Top of the line Glue for extra durable adhesion
- High quality GOLD spring loaded terminals
- Designed, tested, and engineered to work with most of todays popular woofers.These enclosures are built with the quality additives needed to maximize the performance of any sound system.
Enclosure Measurements:
- Type of Enclosure: Ported
- Enclosure Sub Size: Single 15"
- Dimensions in Inches: 17" L x 28" W x 17H"
- Top and Bottom Depth: 17"
- Mounting Depth: up to 12.5" (enough depth for any sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 4.6 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 3.51 Cubic Feet
Complete Single Subwoofer Enclosure Installation Kit!
Includes:
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
Video of RWK4CU:
We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more than 100 % copper. So the only way a cable would out-perform this one is if it were being advertised as a 4 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.
We guarantee that this kit will compete with the most expensive amp kitson the market from Kicker, JL Audio, or any other top brands.
Maximum Power!Looking for a wire kit that has 100% true specifications! A wire kitthat uses 100% copper 4-gauge cable! Then look no further than theRockville True-Spec RWK4-CU 4 Gauge Amplifier Wiring InstallationKit. This package includes everything you'll need to get your amplifiersystem powered-up correctly and at peak efficiency. All items included in this kit are top of the line.The power and ground cables aptly named Mega Power Cable is a nocompromise power cable. Rockvilles engineering team over-built anddesigned the cables using thousands of strands of only true 100%oxygen-free, silver-tinned copper strands. The use of a proprietaryspecial twisting process reduces surface skin impedance loss so thatMega Power cables have zero signal and power loss, delivering full powerfrom your battery system to your amplifier even at lengths of 20 feet!The increased current flow and higher amperage carrying capacity willincrease your amplifiers efficiency and keep your amplifier runningcooler. The SuperFlex outer insulating jacket jacket makes installationand cable routing simple and easy. The 100% copper stranded wire isextremely tolerant of the hostile conditions found under the hood invehicles and compensates for vibration, heat expansion and flexibility.This flexible and well-shielded wire is crucial for getting through allof the nooks and passageways within the confines of a vehicle interior.Some manufactures use all aluminum or mix a little copper with aluminumto give their cables the appearance of a heavy-duty cable. But notRockville, our True-Spec 100% oxygen free, silver tinned coppereliminates corrosion, increases current transfer x 10, and wontdiscolor over time.The superior quality and materials of the Rockville 100% True-Specamplifier installation kit is realized in the included accessories andcable workmanship. Included is a precision CNC cut full size ANL fusehousing, machined from solid brass and then 14K gold plated for superiorsignal transfer and complete with a matching gold plated 120-amp ANLfuse. The power cable is wrapped in 6 feet of durable nylon braidedtubing to protect it from heat and chafing in the engine compartment.All installation accessories such as the ring terminals and spadeconnectors are nickel plated for superior signal transfer anddurability.CRYSTAL SQ AUDIO PLANAR SPEAKER CABLEThe speaker cable included in the Rockville True-Spec is alsomanufactured from 100% copper and woven in to a flat planner design andcoated in our Super-Flex insulation so that it fits under and aroundyour vehicles trim and carpet smoothly and without bulking up. Withcrystal clear sound quality these speaker cables deliver true audiofidelity from your car audio amplifier to your speakers. The 14-gaugespeaker cable included in the 4-gauge kit can handle over 2000 watts ofpower without heating up or degrading signal quality. CRYSTAL SQ RCA AUDIO INTERCONNECT CABLEDesigned and engineered to be the best sounding, best performing andbest looking RCA cables available today. Each channel in the RCA cableis triple shielded first with dielectric internal insulators and thenwith a 98% coverage woven shield. All cables are manufactured of 100%oxygen free copper and feature twisted pair technology for superiornoise rejection and pure sonic signal flow. The RCA plugs are shieldedmetal and feature a spiral cut outer ground ring with center split pinfor precise and tight audio connections. The result of all thistechnology is noise free-noise rejection signal transfer for optimumsound quality. You will hear the difference these RCA signal transfercables will make.
Amplifier Kit Key Features: - Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables
- 4 Gauge Power Amplifier Installation Kit
- Designed specifically for car audio systems over 1000 watts RMS to 2000 Watts
- Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
- The solid brass gold plated Mini ANL Fuse Holder offers ideal protection for high powered systems
- Strand Count: 1862
- BC-5W2 Compliant
Kit includes: - 17 ft. Frosted Blue 4 gauge power wire with seamless crimp ring terminal
- 3 ft. Frosted Gray 4 gauge ground wire
- 17 ft. Blue 18 gauge remote lead wire
- 25 ft. Frosted Clear/Blue 14 gauge flat speaker wire
- 17 ft. Triple shielded twisted pair RCA cables
- One Mini ANL Fuse Holder with 120 amp ANL fuse
- One 1/2 black rubber firewall grommet
- One 4 gauge spade terminal
- Two black 12 gauge nickel-plated spade lugs
- Three blue 12 gauge nickel-plated spade lugs
- One black 4 gauge ring terminal
- Ten 6 black zip ties
Krypton Series (Product Video):What's in the Box:
- Amplifier
- Bass Remote with clipping indicator
- Birth sheet with tested power
- Owners manual
- Mounting Screws
- Warranty
Description of KRYPTON M3:
The Krypton series of amplifiers by Rockville are engineered to have the best reliability and features. Whether you are a car audio competitor or just like to enjoy loud music. We engineered and designed these amps from the ground up to give you great sound quality and great features. You will notice the cool battery voltage display meter which looks great but also serves as a tool for you to know if your battery voltage is dropping which would affect your systems performance. We designed the amps to be able to last for many years even if you are playing them at max volume before clipping for extended periods of time.
Our favorite feature we introduced of the Krypton series is the bass remote that has a clipping indicator. This allows you to set the amp to max output before clipping on any song. This will protect your subs while you maximize SPL. What is nice about this is that you can set the gain level to max before clipping on any given song in real time! If you use a DD-1 or another tool, you are setting the gain on one song but the next song might have more headroom or might clip depending on the levels it was recorded at (this is referred to as crest factor in the engineering world)
We guarantee that this series of amplifiers will not only meet their rated power but exceed their rated power on a certified dyno test.
Another feature we love about this is the bass equalizer. Most amps have this feature however not all bass EQ are created equal. Some bass EQ's will just clip your subs to death. Our bass EQ circuitry will boost the proper frequencies in a way that sounds good and is safe for your subs. In addition you can always use the clip indicator on the bass remote to make sure you are not sending a clipped signal to your subs. Our amplifier is meant to give you as much clean power to your subs as possible. Our voltage display allows you to make sure you are getting the proper voltage to your amp and our clip indicator on the remote will make sure you always send clean power to your subs. In addition we also guarantee the amplifier will be giving over the rated power so you can confidently match our amplifier with high-end subs and know what to expect!
What about sound quality and efficiency though ??Well glad you asked. This amplifier is engineered so well that it has an extremely low signal to noise ratio which just means the sound will be super clean even at high volume levels. It also has a good efficiency rating so you don't have to draw too much power from your battery. One other thing that is important is that we engineered this to have a high common mode rejection rating (CMRR). This means that the amp has the capability to block out engine noise signals. By rejecting unwanted noises the end result is the cleanest sound quality.
Once again, Rockville has stepped up its game with the all new Krypton series. Their is no other amp like it on the market. In our opinion this is the best budget series of amps in the world. We actually enjoy this amp more then others that cost over 2 times the price.
Features:
- Rockville KRYPTON M3 4000 Watt Peak and 1000w RMS Class D 1 Ohm Stable Mono Amplifier With Voltage Display
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 1 Ohm: 1000 Watts x 1 Channel <1% THD+N (71% efficient)
- 2 Ohm: 700 Watts x 1 Channel <1% THD+N (79% efficient)
- 4 Ohm: 400 Watts x 1 Channel <1% THD+N (84.5% efficient)
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 1 Ohm:4000 Watts x 1 Channel
- 2 Ohm:2800 Watts x 1 Channel
- 4 Ohm:1600 Watts x 1 Channel
- Digital Voltage Display on Amp (Accurate within 0.15V)
- Power/Protect/Clip LED Indicators on the front panel
- Power/Protect/Clip LED Indicators on Remote control
- Clip indicator on the bass remote allows you to quickly set any song to right before clipping in real time
- High-Speed MOSFET Power Supply
- Optical Coupler Class D Technology
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Low Pass Filter: 50Hz - 250Hz
- Subsonic Filter: 15Hz - 55Hz
- Phase Control Switch
- Full IC-Controlled Protection Circuitry
- Remote Dashboard Subwoofer Control
- Fully Adjustable 12dB Bass Equalizer
- Mute and Delay Soft Start System
- RCA Preamp Line Output
- 8 Volt Preamp Circuitry
- Status Mode LED Indicator
- Minimum THD at Rated Power: <0.1%
- S / N Ratio: >90dB
- Frequency Response: 15Hz - 250Hz
- Damping Factor: >150 @ 100Hz
- 2 x 60 Amp Maxi Fuse
- Passes the Signal Burst Test (Instant signal for full power SPL Contest)
- Rockville engineered with a super low signal to noise ratio to give you clean sound
- Improved Bass EQ filter works better then any other brand we tested against
- Dimensions: (W x H x L) 13.78 x 8.66 x 2.2
1 YEAR
